UKP

UKP_u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKP_u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lucricated cylinder. Available for bore sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.

SEAL INFORMATION
MATERIAL 90A URETHANE
TEMPERATURE RANGE -40° to +200° F
PRESSURE RANGE 0 to 150 PSI
PART NUMBER (Prefix)(CS) - (Outside Diameter)
Part # I.D. (in) Height (in) Cross Section (in) O.D. (in)
UKP09-0.37 3/16 3/32 3/32 3/8
UKP09-0.68 1/2 3/32 3/32 11/16
UKP12-0.56 5/16 1/8 1/8 9/16
UKP12-0.62 3/8 1/8 1/8 5/8
UKP12-0.75 1/2 1/8 1/8 3/4
UKP12-0.87 5/8 1/8 1/8 7/8
UKP12-1.00 3/4 1/8 1/8 1
UKP12-1.06 13/16 1/8 1/8 1-1/16
UKP12-1.12 7/8 1/8 1/8 1-1/8
UKP12-1.25 1 1/8 1/8 1-1/4
UKP12-1.50 1-1/4 1/8 1/8 1-1/2
UKP12-1.87 1-5/8 1/8 1/8 1-7/8
UKP12-2.00 1-3/4 1/8 1/8 2
UKP12-2.75 2-1/2 1/8 1/8 2-3/4
UKP15-1.50 1-3/16 5/32 5/32 1-1/2
UKP15-1.56 1-1/4 5/32 5/32 1-9/16
UKP18-1.75 1-3/8 3/16 3/16 1-3/4
UKP18-2.00 1-5/8 3/16 3/16 2
UKP18-2.25 1-7/8 3/16 3/16 2-1/4
UKP18-2.50 2-1/8 3/16 3/16 2-1/2
UKP18-2.62 2-1/4 3/16 3/16 2-5/8
UKP18-4.00 3-5/8 3/16 3/16 4
UKP21-3.00 2-9/16 7/32 7/32 3
UKP21-3.25 2-13/16 7/32 7/32 3-1/4
UKP25-10.00 9-1/2 1/4 1/4 10
UKP25-3.00 2-1/2 1/4 1/4 3
UKP25-3.25 2-3/4 1/4 1/4 3-1/4
UKP25-3.50 3 1/4 1/4 3-1/2
UKP25-4.00 3-1/2 1/4 1/4 4
UKP25-5.00 4-1/2 1/4 1/4 5
UKP25-6.00 5-1/2 1/4 1/4 6
UKP25-7.00 6-1/2 1/4 1/4 7
UKP25-8.00 7-1/2 1/4 1/4 8
UKP31-6.00 5-3/8 5/16 5/16 6
UKP31-8.00 7-3/8 5/16 5/16 8
UKP37-10.00 9-1/4 3/8 3/8 10