Packing Tools

The Right Tool for the Job

A complete integrated line of U.S. made tools designed to handle your packing maintenance with ease. The unique interchangeability of tips with flex or rigid holders allows a versatility not available elsewhere. Worn or damaged tips may be replaced at minimum cost rather than sacrificing the entire tool. Plated for corrosion protection, these tools meet or exceed Government Specifications. Removable tips include; C-1, 2&3 Corkscrews for most packing, W-1,2&3 Woodscrews for hardened packing, B-1&2 Brush Sets (two sizes each set) for cleaning the stuffing box, OP-1&2 Oakum Pullers, and LG-1&2 Lantern Gland Thread Adapter Sets (three thread sizes per set). Also included into the line are Solid shaft Picks P-7, 8&9 to remove packing that breaks up easily, Stainless steel Vernier Calipers to accurately determine packing requirements, an O-Ring Extractor constructed with the proper curve and offset to make a sometimes difficult job, easy - without risk to equipment, and a Packing Knife w/sheath. A keen edged Stainless blade mounted in a wooden handle for a good grip, makes a fine addition to any toolbox.

Guillotine Packing Cutter
Easily cuts all packing including Kevlar, copper sheathed, and wire core packing to 1" diameter at 45 degrees or butt angles. 4" maximum shaft size direct-reading Diameter/Circumference scales eliminate expensive time and material waste from costly trial-and-error fitting. Complete with mounting screws, wrenches, stop blocks for 45 degrees and butt cutting, and a vernier caliper for accurate shaft and stuffing box measurement. Heat-treated spare tool steel blades are available.

Tool Sets
Packaged in handy tool boxes, these sets are assembled in three different levels to suit a wide variety of applications - the "Deluxe" set being the most complete in the industry.

Gasket Punch Set
Effortlessly cuts concentric gaskets and washers from non-metallic materials and soft metals. Set consists of 14 hardened chrome nickel steel punches 3/16"-1" by 1/16ths, centering pin, and two cutting surfaces to protect your bench. Packaged in rust-proof tool box.

| Braided Packings | Packing Tools |

Email us at: [email protected]
Phone: (714) 556-4931 • Toll Free: (800) 553-5054 • Fax: (714) 557-3257
Copyright ©2002 All Seals Incorporated. All rights reserved.