
	O-Rings, Quad Rings®, Back-Up Rings
	Gaskets
	Mechanical Seals
	Hydraulic Seals
	Radial Shaft Seals/Oil Seals
	Teflon®/PTFE Products
	Custom Diaphragms
	Sanitary Gaskets
	EMI Shielding
	Rubber Products
	Rubber Extrusions
	Cord Stock
	Sheet Stock
	Thread Seals
	Lubricants
	Adhesives
	Plastic Injection Molded Parts
	Machined Metal Parts
	Packings
	Permaglyde® (Friction Reduction)


	Engineering Assistance
	Design Consultation
	Material Compatibility
	Value/Reverse Engineering
	Friction Management
	Purchasing Assistance
	Vendor Consolidation
	Equivalent Materials
	Vendor Managed Inventory
	Cost Reduction
	Global Sourcing
	Operations Assistance
	Kitting
	Sub Assembly
	Specialty Packaging
	Material Traceability
	Certifications
	PPAP Approvals
	Bin Stocking
	Shipment Consolidation

Contact Information

All Seals Incorporated
The Sealing Specialists

CALIFORNIA OFFICE:
20762 Linear Lane
Lake Forest, CA 92630
Phone: (714) 556-4931
Toll Free: (800) 553-5054
Fax: (714) 557-3257

TEXAS OFFICE:
4407 Halik Road, Building A
Pearland, TX 77581
Phone: (281) 404-4384
Toll Free: (800) 553-5054
Fax: (281) 715-5379

Now Accepting

LEXAN� FR 700�701

Developed by GE, this film is a UL 94V-0 listed material with one side fine matte, and the other side velvet flame-retardant polycarbonate film. It is designed for many types of electrical and electronic applications.

Back to Films

Applications

Insulation for power supplies, disc drives, bus bars, keyboards, TVs/monitors and PC boards
Business equipment insulation
EMI/RFI shielding and insulation when laminated with foil

Features and Benefits

Flame retardant
Excellent mechanical properties
Good dimensional stability at elevated temperatures

Availability

Finish: Velvet/fine matte
Rolls: 48″ standard width
Minimum, Standard and Custom Gauges: .010″ – .030″

PROPERTIES	TEST METHOD	FR 700 VALUE
PHYSICAL
Specific Gravity	ASTM D792	1.32
Area Factor	Calculation	145.75 ft2/lb/mil 13.54 m2/lb/mil
Water Absorption, Equilibrium, 24 Hrs	ASTM D570	0.28%
MECHANICAL
Tensile Strength @ Yield 9,500 Ultimate	ASTM D882	9,500 psi 8800 psi
Tensile Modulus	ASTM D882	310,000 psi
Elongation	ASTM D882	25–50%
Tear Strength Initiation Propagation	ASTM D1004 ASTM D1922	770–910 g/mil 16–40 g/mil
Puncture Resistance	ASTM D1048	332 lb/in
THERMAL
Tensile Heat Distortion @ 50 psi	ASTM D1637	150°C
Heat Deflection Temperature @ 264 psi	ASTM D648	135°C
Thermal Conductivity	ASTM C177	0.19 Watt/M-°C
Glass Transition	DSC	156°C

PROPERTY	TEST METHOD	FR 700 VALUE
ELECTRICAL
Dielectric Strength (@ 10 mils)	ASTM D149	17,000 Volts
Dielectric Constant @ 25°C, 50% RH @ 60 Hz @ 1,000 Hz @ 1,000,000 Hz	ASTM D150	2.9 2.8 2.8
Dissipation Factor @ 25°C, 50% RH @ 60 Hz @ 1,000 Hz @ 1,000,000 Hz	ASTM D150	0.0026 0.0028 0.0117
Volume Resistivity @ 25°C, 50% RH	ASTM D257	1016 ohm-cm
Surface Resistivity @ 25°C, 50% RH	ASTM D257	1015 Ω
FLAMMABILITY
UL Flammability*	UL Bulletin 94	V-0 > .01011
Oxygen Index	ASTM D2863	33
Flash Point		825°F(440°C)
Self-Ignition Temperature		1120°F(605°C)
FMVSS 302	ASTM D618	All Pass
NFPA 258–NBS Smoke Chamber Test (10 mil)	ASTM E662	D(4) = 6 D(max) = 36
*This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

We serve a wide range of industries... When you have a sealing problem, contact us for the most effective solution.