10-3050 is a thixotropic, Non-Sag, gel epoxy
designed to protect motor windings from abrasives, chemicals,
vibration, oils, jet fuels, etc... 10-3050 self levels to
a smooth void free coating once applied with a spatula or
brush.
10-3050 stays exactly where applied and will not run out
of coil windings or stator slots. This unique adhesive forms
a tenacious bond to most substrates.
10-3050 is color coded to facilitate proper mixing of Resin
and Catalyst. 10-3050 Resin is White and Catalyst is Black.
| Typical Specifications |
| Mixed viscosity, 25°C, cps |
Paste |
| Pot life, 25°C |
40 Minutes |
| Color mixed |
Grey |
| Specific gravity, 25°C/25°C |
1.4 |
| Hardness, shore D |
75D |
| Shrinkage linear, in/in |
.002 |
| Tensile strength, psi |
8,000 |
| Compressive strength, psi |
20,500 |
| Water absorption, 240 hrs, 96% rh, % weight grain |
0.8 |
| Operating temperature range, °C |
-60 to +160 |
| Thermal conductivity, Btu in/ft2 hr °F |
4.1 |
| Thermal expansion coefficient, per °C |
49 x 10-6 |
| Dielectric strength, volts/mil |
485 |
| Dielectric constant, 60 Hz |
0.01 |
| Dissipation factor, 60 Hz |
.015 |
| Volume resistivity, ohm-cm |
4.0 x 1014 |
|
