MP 54190 is a two part mineral
filled epoxy adhesive designed for bonding metals and plastics.
It cures at room temperature to a tough, semi-flexible material.
It has good wetting to most surfaces and is free flowing to
penetrate cavities and give good self leveling and air release.
This product gives very good vibration and impact resistance.
It gives good resistance to water, salt spray, inorganic acids
and bases and most organic solvents.
It was especially formulated to a 1A:1B volume mix ratio
for use in side-by-side dispensing cartridges and meter/mix
and dispense equipment. MP 54190 will reach handle cure at
room temperature within 16 – 24 hours. Cure time can
be accelerated by the application of heat. Times and temperatures
from 2 hours at 65°C to 20 minutes at 100°C are typical
for most applications. Time to heat substrate must be taken
into account. Cooler temperatures will also extend work time
and increase cure times.
|